NEC Express5800 Series User Manual page 50

Express server
Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

The following figure illustrates a site suitable for installing the console drawer.
Room that satisf ies the
f ollowing conditions: *
<While operating>
Temperature: 5 to 45ºC
Humidity : 10 to 85%
* If the console drawer is installed in high temperature area and you do not need to use console feature, store the
console drawer in rack during operation.
Express5800 Series 17.3-inch LCD Console Drawer (1port) User's Guide
50
Close enough to connect the
power cord to power outlet or
UPS
100 to 240 Vac parallel bi-
polar wall power outlet
with the ground line, or
UPS
Install the rack on a f lat and
rigid f loor.
Im portant
If tw o or m ore devices are installed on the rack or the ventilation within the
rack is not enough, the temperature in the rack may be raised by the heat
generated from the units to be higher than the operation temperature of the
server.
It causes the server products to operate improperly. Review the air flow
w ithin the rack or in the room and take sufficient measures so that the
tem perature within the rack does not exceed the warranted temperature
range during the system operation.
Allow clearance of at least 1 m in
f ront and behind, 60 cm in left
and right, and 40 cm in height.
If sev eral racks are to be used,
anchor them.
The rack must be
f ixed with stabilizers.

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8143-122f

Table of Contents