NEC Express5800 Series User Manual page 47

On / Off touchpad feature
Touch pad features can be enabled / disabled.
Enabled at the time of factory shipment.
Disabling (1) Connect the console drawer with the server, then start the server.
(2) Keep holding down [HOT-KEY] switch for more than 5 seconds to enter touch pad
(3) While holding down [HOT-KEY] switch, press <6> of ten key. And then press <0>.
(4) Release [HOT-KEY] switch to finish setting.
Enabling (1) Connect the console drawer with the server, then start the server.
(2) Keep holding down [HOT-KEY] switch for more than 5 seconds to enter touch pad
(3) While holding down [HOT-KEY] switch, press <6> of ten key. And then press <1>.
(4) Release [HOT-KEY] switch to finish setting.
* if you misoperated, release [HOT-KEY] switch and redo setting.
Express5800 Series 17.3-inch LCD Console Drawer (1port) User's Guide
setting mode.
While in setting mode, NUM LOC and SCROLL LOCK LEDs flash one after the other.
After setting ends normally, CAPS LOCK LED flashes 4 times.
setting mode.
While in setting mode, NUM LOC and SCROLL LOCK LEDs flash one after the other.
After setting ends normally, NUM LOCK LED flashes 4 times.
47