VIA Technologies P4PA User Manual page 53

Chapter 3
PS2KB Wakeup from suspend
Select which Hot-Key to wake-up the system from power saving mode.
Settings: Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6,
Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake and
Any Key.
USB Resume from S3
Decide whether or not the USB devices can wake the system from suspend
state. Settings: Disabled and Enabled.
PowerOn by PCI Card
Decide whether or not any PCI card can power up the system or resume from
suspend state. Such PCI cards include LAN, onboard USB ports, etc. Settings:
Disabled and Enabled.
Modem Ring Resume
Decide whether or not any Ring-In signals from Modem can wake up the
system from suspend state. Settings: Disabled and Enabled.
RTC Alarm Resume
The field is used to enable or disable the feature of booting up the system
on a scheduled time/date. Settings: Disabled and Enabled.
Date (of Month)
The field specifies the date for RTC Alarm Resume. Settings: 0~31.
Resume Time (hh:mm:ss)
The field specifies the time for RTC Alarm Resume. Format is
<hour><minute><second>.
3-20