Wacker Neuson M1000 Operator's Manual page 53

Assembling the vibrator head
1. Place pipe thread seal on the thread of the housing.
2. Screw the housing on the connecting piece and tighten with a large pipe
3. Place pipe thread seal on the thread of the flexible shaft.
4. Place the vibrator head with the thread on the flexible shaft, while guiding the
5. Screw the vibrator head on the flexible shaft (Caution! Left-hand thread) and
6. Let pipe thread seal cure for 24hours.
100_0101_mt_0007.fm
wrench.
shaft core into the shaft core adapter of the vibrator head.
tighten with large pipe wrench.
53
11 Maintenance