Wacker Neuson M1000 Operator's Manual page 23

100_0101_ls_0006.fm
Item Label
4
5
4 Safety and information labels
Description
Warning
1. To ensure protection against electrc
shock, test the device befor each use.
When test button is pushed in the indi-
cator light should go off. Reactivate the
device by pushing the reset button an
release. If the indicator light goes on,
the device is ready for use. Do not use
the device if the indicator light remains
on, when the test button is pushed in.
2. This device does not guard against
electric shocks resulting from (A) pos-
sible defect or faults in an extension
cor or wiring supplying the GFCI, or (B)
short circuits between hot and neutral
conductors. If necessary, use only with
#14AWG or lager (smaller numerical
value) extension cord for 15A rated de-
vice and #12AWG or larger for 20A rat-
ed device.
Warning
To protect against electric shock, test be-
fore each use.
1. Plug into receptacle.
2. If light is not on, press, and release re-
set button - light should come on.
3. Press test button - licht must go off.
4. Press and release reset button again
for use.
Do not use if test fails.
Rainproof.
Do not immerse.
23