Table of Contents
Advertisement
11 Maintenance
Lubricating the shaft core
Note: If the flexible shaft is damaged or has grooves, the flexible shaft must be
Assembling the flexible shaft
1. Insert the shaft core completely in the protective hose while turning. Turning
2. Guide the shaft core in the shaft core adapter of the vibrator head.
3. Place pipe thread seal (accessory) on the thread of the coupling.
4. Screw the coupling onto the flexible shaft and tighten with large pipe wrench
5. Check the shaft core for free movement, while turning with the special wrench
Note: If the shaft core is new, the drive must run approx. 5minutes with the flex-
Item
Designation
1
Shaft core
2
Protective hose
replaced.
Lubricate the shaft core thinly and uniformly with special lubricant (accesso-
ries) using your hands.
the shaft core lubricates the special lubricant.
or special wrench (accessory).
(accessory).
ible shaft connected (if necessary with the vibrator head as well).
50
100_0101_mt_0007.fm
Advertisement
Table of Contents
