Wacker Neuson M1000 Operator's Manual page 52

11 Maintenance
Changing the oil in the vibrator head
Opening the vibrator head
1. Remove any dirt around the connecting piece.
2. Clamp flexible shaft in a vice with prism jaws.
3. Unscrew the vibrator head from the flexible shaft with a large pipe wrench
4. Clean the thread of the vibrator head and the flexible shaft with a wire brush
5. Clamp the vibrator head in the area of the connecting piece.
6. Unscrew the housing from the connecting piece with a large pipe wrench.
Changing the oil
1. Pour out oil and dispose of environmentally friendly.
2. Clean the threads of the connecting piece and the vibrator head with a wire
3. Fill oil in the housing according to specification and in the correct amount, see
Item Designation
1 Housing
2 Connecting piece
(Caution! Left-hand thread).
and cleaning agent.
brush and cleaning agent.
chapter Technical Data.
Item Designation
3 Shaft core adapter
52
100_0101_mt_0007.fm