Table of Contents
Advertisement
3 Safety
Caution with movable parts of the HMS
Keep your hands, feet and loose clothing away from moving or rotating vibrator
head (Components of the HMS).
Do not use components of to HMS for climbing on or holding onto
Never use the protective hose, power cable or other components of the HMS for
climbing on or holding onto.
Protecting the flexible shaft (Components of the HMS)
Do not bend or kink the flexible shaft excessively.
Do not drag the flexible shaft over sharp edges.
If the flexible shaft jams in the reinforcement, switch off the drive and disconnect
the flexible shaft from the drive. Then free the flexible shaft by carefully moving
it back and forth.
Switching off the machine
Switch off the machine and pull the plug out of the plug receptacle in the following
situations:
Before storing the machine, wait until it has completely stopped running.
Store the machine or put it down in such a way that it cannot tilt, fall down or slip.
Storage
Set the machine down or store it securely so that it cannot tilt, fall down or slip.
Storage location
After operation, allow the machine to cool and then store it in a sealed-off, clean
and dry location protected against frost and inaccessible to children.
Vibrations of the HMS
When manually operated drive motors are intensively used, long-term damage
caused by vibrations cannot be precluded.
Observe the relevant legal instructions and guidelines to minimize vibration
stress.
Details on vibration stress associated with the HMS can be found in the chapter
Technical Data.
Before breaks.
If you are not using the machine.
16
100_0101_si_0004.fm
Advertisement
Table of Contents
