Wacker Neuson M1000 Operator's Manual page 49

Replacing the plastic bushing
1. Remove retaining clip with a screwdriver.
2. Pull out plastic bushing with a pulling tool if necessary.
3. Wipe off bearing surface with a clean, lint-free cloth.
4. Push in a new plastic bushing.
5. Place the retaining clip on with the concave side to the inside, until all the
100_0101_mt_0007.fm
Item Designation
1 Flexible shaft
2 Plastic bushing
teeth engage in the groove.
Item Designation
3 Retaining clip
49
11 Maintenance