Indicator And Button Description - Ruijie RG-AP840-I (V2) Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Safety regulation
EMC regulation
1.5

Indicator and Button Description

Note
In the description of the indicator status, unless otherwise specified, the indicator status description applies to
both Fit AP and Fat AP.
Table 1-8 System indicator status description
Indicator
Color
Off
Steady
green
Steady red
Slow blink in
red
Fast blink in
blue
Steady blue
Blinking
blue
Fast blink in
red
GB 4943.1-2011, IEC 62368-1
EN 300386, GB/T 19286-2015, GB/T 17618-2015
Blinking
Description
Frequency
The AP is not powered on, or has been powered on but the indicator is
None
turned off by software.
None The AP is performing software system initialization.
The system is running normally, but the uplink service port of the AP is
None
Link Down.
On for 3s
In Fit AP mode, the establishment of a CAPWAP tunnel between the AP
and the AC times out.
Off for 1s
On for 0.2s
In Fit AP or MACC AP mode, the AP is updating software system.
Off for 0.2s
The software system is running normally, and the AP is working normally
None
but no wireless users are online.
On for 1s
The software system is running normally. The AP is working normally and
wireless users are online.
Off for 1s
On for 0.2s
In Fit AP mode, the AP enables the indicator positioning function to find a
specific AP.
Off for 0.2s
8
Product Overview