Aztec Code Page; Chinese Sensible (Han Xin) Code - Honeywell HF680 Series User Manual

Aztec Code Page

Aztec Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
Character Replacements
from the

Chinese Sensible (Han Xin) Code

Han Xin Code On/Off
Han Xin Code Message Length
Scan the barcodes below to change the message length. Refer to
Description
= 1-7833. Minimum Default = 1, Maximum Default = 7833.
Minimum Message Length
114
on page 168), and scan the value and the Save barcode
Programming Chart. The data characters should then appear properly.
< Default All Han Xin Settings >
On
(page 68) for additional information. Minimum and Maximum lengths
Aztec Code Page
ISO 2022/ISO 646
* Off
Message Length
Maximum Message Length
HF680 Series User Guide