Good Read Delay; User-Specified Good Read Delay; Ir Trigger Mode - Honeywell HF680 Series User Manual

Good Read Delay

This sets the minimum amount of time before the scanner can read another
barcode. Default = 0 ms (No Delay).

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the barcode below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
Programming

IR Trigger Mode

When in IR Trigger mode, the scanner uses an infrared (IR) sensor to detect objects
and start to scan and decode barcode symbols. Default = IR Trigger Mode.
HF680 Series User Guide
* No Delay
Medium Delay (1,000 ms)
Chart, then scanning Save.
User-Specified Good Read Delay
IR Trigger Mode
Short Delay (500 ms)
Long Delay (1,500 ms)
33