Aztec Code; Aztec Code Page - Honeywell 1602-B User Manual

Aztec Code

Aztec Code On/Off
Aztec Code Message Length
Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 1-3832. Minimum Default = 1, Maximum Default = 3832.
Minimum Message Length
Aztec Append
This function allows the scanner to append the data from several Aztec bar codes together before transmitting them to the
host computer. When the scanner encounters an Aztec bar code with the append trigger character(s), it buffers the number
of Aztec bar codes determined by information encoded in those bar codes. Once the proper number of codes is reached,
the data is output in the order specified in the bar codes. Default = On.

Aztec Code Page

Aztec Code pages define the mapping of character codes to characters. If the data received does not display with the
proper characters, it may be because the bar code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below, select the code page with which the bar
7 - 42
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
< Default All Aztec Code Settings >
* On
* On
Message Length Description
Maximum Message Length
Off
(page 7-2) for additional
Off