Table of Contents
Advertisement
Aztec Code
< Default All Aztec Code Settings >
Aztec Code On/Off
* On
Off
Aztec Code Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description
(page 6-1) for additional
information. Minimum and Maximum lengths = 1-3832. Minimum Default = 1, Maximum Default = 3832.
Minimum Message Length
Maximum Message Length
Aztec Code Page
Aztec Code pages define the mapping of character codes to characters. If the data received does not display with the
proper characters, it may be because the bar code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below, select the code page with which the bar
codes were created (see
ISO 2022/ISO 646 Character Replacements
on page A-7), and scan the value and the Save bar
code from the
Programming Chart
on the inside the back cover of this manual. The data characters should then appear
properly.
Aztec Code Page
6 - 38
Advertisement
Table of Contents
