Aztec Code Page
Aztec Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar-
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the barcode below, select the
code page with which the barcodes were created (see
Replacements
Programming
Chinese Sensible (Han Xin) Code
Han Xin Code On/Off
Han Xin Code Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 1-7833. Minimum Default = 1, Maximum Default = 7833.
Minimum Message Length
158
on page 220), and scan the value and the Save barcode from the
Chart. The data characters should then appear properly.
< Default All Han Xin Settings >
On
(page 114) for additional information. Minimum and Maximum
ISO 2022/ISO 646 Character
Aztec Code Page
* Off
Message Length
Maximum Message Length
Voyager XP User Guide