Gs1 Composite Codes; Upc/Ean Version - Honeywell HF680 Series User Manual

GS1 Composite Codes

Linear codes are combined with a unique 2D composite component to form a new
class called GS1 Composite symbology. GS1 Composite symbologies allow for the
co-existence of symbologies already in use. Default = Off.

UPC/EAN Version

Scan the UPC/EAN Version On barcode to decode GS1 Composite symbols that
have a U.P.C. or an EAN linear component. (This does not affect GS1 Composite
symbols with a GS1-128 or GS1 linear component.) Default = UPC/EAN Version Off.
Note: If you scan coupons that have both UPC and GS1 Databarcodes, you may wish to
scan and output only the data from the GS1 Databarcode. See
Output
GS1 Composite Code Message Length
Scan the barcodes below to change the message length. Refer to
Description
= 1-2435. Minimum Default = 1, Maximum Default = 2435.
Minimum Message Length
104
On
UPC/EAN Version On
(page 89) for further information.
(page 68) for additional information. Minimum and Maximum lengths
* Off
* UPC/EAN Version Off
Coupon GS1 DataBar
Message Length
Maximum Message Length
HF680 Series User Guide