Operation - Omcan VP-NL-0050-LS Instruction Manual

Operation

Menu Button:
• Toggles between Home menu
• Save Function: During programming, confirms and saves the entered program values and
returns to the Home menu.
• Return Function: Returns to the Home menu.
review program values:
•
• Displays the programmed value for each function; the function being reviewed will be
blinking.
•
• Returns to the Home menu.
Adjust program values and turn functions ON/OFF:
•
•
• Turns functions ON/OFF; specific functions, like soft-air, clean cut seal, etc., are turned
either on or off.
• If the function is turned on, the value may be adjusted by pressing the
• Resets the original value.
• Saves changes and returns to the Home menu.
Multi-Functional button: Performs various functions, depending on the active menu:
Home menu
• No effect while in the PA program.
• For programs P1-9, displays the entered values.
Settings menu
• For specific functions, like soft-air, clean cut seal etc., the
ON/OFF.
Programs 1 through 9:
• Each program may be customized by turning certain functions on or off and by adjusting the
function values.
PA - Automatic:
• Program with factory settings for vacuum and sealing functions, which is activated when
turning on the machine for the first time.
P H O – Program:
2
• To be used when packing liquids or semi-liquids, like sauces and soups.
• Program jumps to the sealing function as soon as product boiling is detected; this prevents
product loss through spillage and evaporation.
Cycles through programs P1 to P9, as well as PA and P H2O.
Displays the value for the next function.
Forward or back; adjusted values are saved right away.
Increases or decreases function values.
:
:
and Settings menu
8
.
and buttons.
button is used to turn the function