Field Module; Installing - Siemens SIPROCESS GA700 Operating Instructions Manual

Installing/mounting

5.3 Field module

5.3 Field module
5.3.1

Installing

Procedure
Secure the field module with suitable M10 screws and suitable tools, such as an open-ended
wrench SW 16. You can find the dimensions for the bracket holes in the drawing. The 4 holes in
the mounting plate
a mounting bracket with the order number A5E35702880. This angle is used for mounting in the
example.
①
Figure 5-2
Note
Observe the distance between the field control unit and field module
The preassembled cable on the field module is 7 meters long. Make sure when selecting the
mounting locations for the two units that this cable can be routed tidily.
Be aware of the preferred mounting direction of the module when mounting.
Note
Note mounting direction
Rotate the module so that the power cable is on the right when facing the wall.
36
①
of the field module have the dimension M10. You can separately order
Mounting plate
Field module
Operating Instructions, 05/2022, A5E35640463-07
Field device