Changing The Weight Of The Internal Calibration Weight - KERN ALJ Operating Instruction

8.5 Changing the weight of the internal calibration weight

!
This change can be carried out solely by a specialist holding thorough knowledge of
handling scales.
! Information on reference weights can be found on the Internet at
http://www.kern-sohn.com.
 Display the menu item "Technical adjustment", see chapter

To confirm, press and hold the PRINT button until the sound signal stops.

Press and hold the MENU button until the sound signal stops. The scale will switch to
the weighing mode again automatically.

Ensure there are no objects on the scale plate. Press the CAL button.

Wait until the blinking weight value of the adjustment weight is displayed.

During blinking, place the required adjustment weight carefully in the middle of the
scale plate. The blinking symbol will disappear.

Wait until the stabilization indicator is displayed, remove the adjustment weight.

Press and hold the PRINT button until the sound signal stops.
The weight of the internal adjustment weight will be changed.

After the successful change, the scale will switch to the weighing mode again
automatically.
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112

8.1.
39