Glp Function (Good Laboratory Practice) - KERN ALJ Operating Instruction

12.8 GLP function (Good Laboratory Practice)

In the settings of the "GLP" function, the information printed in measurement reports
is defined.
 Using the navigation buttons , select the menu item <GLP>.
 Confirm, pressing PRINT. The symbol will be displayed to enable to enter the
scale identification number.
 Using the navigation buttons (see chapter 3.2.2), enter the scale identification
number (max. 18 characters).
 Confirm by pressing PRINT. The symbol will be displayed to enable to enter the
user ID.
 Using the navigation buttons (see chapter 3.2.2), enter the user ID (max. 18
characters).
 Confirm, pressing PRINT. The symbol will be displayed to enable to enter the
project ID.
 Using the navigation buttons (see chapter 3.2.2), enter the project ID (max. 18
characters).
 To save all information, press and hold the PRINT button until the sound signal
stops. The scale will switch to the weighing mode again automatically.
88 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112