Auto Zero - KERN ALJ Operating Instruction

11.4 Auto zero

This menu item enables to switch on or off the automatic zero point correction. In the
switched on state, the deviation or zero point disturbance is corrected automatically.
Tip:
If the amount of the weighed material is reduced or increased significantly, the
scale's "stabilizing and compensating" mechanism can result in displaying erroneous
weighing results! (e.g.: slow outflow of the liquid from the container placed on the
scale, evaporating processes).
When dosing with small weight fluctuations, it is recommended to switch this function
off.
 Using the navigation buttons , select the menu item <Auto zero>.
 Confirm by pressing the PRINT button, the current setting will be displayed.
 Using the navigation buttons , select the required setting.
Symbol
Auto zero off
Auto zero 1
Auto zero 2
Auto zero 3
Auto zero 3E
 Confirm the selection, pressing the PRINT button. The scale will be switched to
the menu again.
 Return to the weighing mode, pressing the ON/OFF button.
52
,
Description
"Auto zero" function is off
Range of the "Auto zero" function ±½ digits
Range of the "Auto zero" function ±3 digits
Range of the "Auto zero" function ±7 digits
Range of the "Auto zero" function ±7 digits in the entire
weighing range
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112