Technical Specification; Device Overview - KERN ALJ Operating Instruction

17.3 Technical specification

"Sample–ion source"
distance
Ozone concentration
Weight
Dimensions [cm]
Ambient conditions
Power supply
input voltage
Ionizing unit
input voltage
Contamination degree
Overvoltage category
Installation height
above sea level
Location site

17.4 Device overview

Keyboard overview
1 Active ion source (Continuous Mode)
(automatic switch off after 8 h)
To switch between the operation modes, press one of the two buttons.
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112
Ca. 5–40 cm
0~0.05 ppm (2 cm to the ion source)
525 g
110 × 105 × 60
0–50°C, air humidity 20–80% (non-condensing)
100–240 VAC; 50/60 Hz
12 VDC, 500 mA
2
Category II
up to 2000 m
Solely indoors
2 Active ion source (Time Mode)
(2-minute operation mode)
99