Javad TRIUMPH-2 Manual page 8

Pairing Using NetView
Step 4. This article is intended to speed you along
in getting your radio paired with your receiver. It
is not meant to be a comprehesive guide on the
use of NetView.
For additional details on using NetView, please
refer to the NetView Software Manual available at
our website:
http://www.javad.com/downloads/javadgnss/manuals/
NetView/NetView_Software_Manual.pdf
On the left panel, click on Connection and then
choose from a previously saved profile in any of
the 10 available slots, or click on an empty slot to
create a new one.
In this example, an empty slot has been chosen.
Step 5. Choose SER for the Connection setting
from the pull down menu and then choose the
appropriate (virtualized) serial port.
8 www.javad.com
Pairing the Radio