Firstech CM6200 Installation Manual page 32

CM6200 Install Guide
STEP 2: Scroll through menu allowing for 1 parking light flash and/or siren chirp per step.
STEP 3: Once finished scrolling through the menu wait for the parking lights and/or siren chirp to confirm
the option number. i.e. option 2-04 will flash 4 times. Then use one of the table selections to select the
option corresponding to your desired setting.
Resetting to Factory Defaults: To reset the options in a particular menu group, enter the menu shown in the
above tables. To reset options with a 2 Way remote tap button 3 three times. To reset options with a 1 Way
remote tap the Key/Start button 3 times. Wait for the siren to chip and parking lights to flash between each
tap. After the third tap, the option menu will reset and the siren will chirp three times. This must be done for
each option group that needs to be reset.
Lock + Unlock for 2.5
Option
seconds then Lock + Unlock
Menu 1
for 2.5 seconds
Lock + Unlock for 2.5
Option
seconds then Lock + Key for
Menu 2
2.5 seconds
Lock + Key for 2.5 seconds
Option
then Lock + Unlock for 2.5
Menu 3
seconds
Lock + Key for 2.5 seconds
Option
then Lock + Key for 2.5
Menu 4
seconds
Copyright 2012 Firstech, LLC.
How To Program Options With 1 Way Remotes
Hold Trunk +
Key for 2.5
seconds
Hold Trunk +
Key for 2.5
seconds
Hold Trunk +
Key for 2.5
seconds
Hold Trunk +
Key for 2.5
seconds
www.firstechonline.com | www.compustar.com
Tap Lock Tap Unlock
Button Button
Tap Lock Tap Unlock
Button Button
Tap Lock Tap Unlock
Button Button
Tap Lock Tap Unlock
Button Button
Starter System
Hold Trunk +
Tap Key
Key for 2.5
Button
seconds
Hold Trunk +
Tap Key
Key for 2.5
Button
seconds
Hold Trunk +
Tap Key
Key for 2.5
Button
seconds
Hold Trunk +
Tap Key
Key for 2.5
Button
seconds
Page 32