Sanus Systems VMTV Assembly Instructions Manual page 4

Required Tools: Drill with 7/32" drill bit, wrench or socket set, and a Phillips screw driver
Supplied Parts: Hardware shown actual size. Other parts are scaled.
(1) Wall Plate - a
(1) Arm Pivot Bolt - d
(1) Plastic
Connector Top - g (1) Set Screw - h
(1) Platter Bolt - j
(1) Plastic Connector Bottom - m
(4) Lag Bolt - b
(1) TV Platter - i
(1) Platter Bolt Washer - k
(1) TV Strap - n
(1) Arm Pivot Nut - e
(1) Arm - c
(1) Wall Plate Cover - f
(1) Platter Nut - l
(1) Nylon Washer - o