Advertisement
Quick Links
IMPORTaNT SaFETY INSTRuCTIONS - SaVE THESE INSTRuCTIONS
Thank you for choosing a Sanus Systems VMTV monitor mount. The VMTV monitor mount is designed to support
monitors 13 to 27 inches (33 to 68 cm); maximum weight capacity is 45 kg (100 lbs.). The VMTV monitor mounts are
adjustable, allowing up to 110˚ of swivel, up to 180˚ of roll, and three tilt settings 0˚, -5˚, and -10˚.
Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper assembly may cause
property damage or personal injury. If you do not understand these directions, or have doubts about the safety
of the assembly, contact Customer Service or call a qualified contractor. Sanus Systems is not responsible for
damage or injury caused by incorrect assembly or use.
This product is designed for use in wood stud walls only! The wall must be capable of supporting up to five times
the weight of the monitor and mount combined. If you have any doubts about the ability of the wall to support
the monitor, contact Customer Service, or a qualified contractor.
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from young children!
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
VMTV
(6901-100175 <01>)
CauTION
CauTION
WaRNING
Customer Service: 1-800-359-5520 • 651-484-7988
info@sanus.com • www.sanus.com
©2008 Milestone AV Technologies
002555.eps
TWM - complete assembly
Advertisement
Related Manuals for Sanus Systems Monitor Mount VMTV
Summary of Contents for Sanus Systems Monitor Mount VMTV
- Page 1 IMPORTaNT SaFETY INSTRuCTIONS - SaVE THESE INSTRuCTIONS Thank you for choosing a Sanus Systems VMTV monitor mount. The VMTV monitor mount is designed to support monitors 13 to 27 inches (33 to 68 cm); maximum weight capacity is 45 kg (100 lbs.). The VMTV monitor mounts are adjustable, allowing up to 110˚...
-
Page 2: Supplied Parts And Hardware
7/32 in. Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Customer Service. Never use damaged parts! [03] x 1 [04] x 1 [01] x 1 [02] x 1... - Page 3 7/32 in. 63.5 mm (2.5 in.) [01] [09] CauTION Avoid potential injuries or property damage! Do not overtighten the lag bolts [09]. Tighten the bolts only [01] until they are pulled firmly against the wall plate [01]. 6901-100175 <01> 002557.eps...
- Page 4 NOTE Do not overtighten the pivot nut [12]. The arm [03] must be free to move. [02] 002558.eps TWM - Install Arm [10] [03] [12] [08] [06] 6901-100175 <01>...
- Page 5 [11] [15] [14] [13] 6901-100175 <01> [11] CauTION Avoid potential injuries or property damage! Do not use the -10° Tilt position for monitors larger than 23 in. (68 cm) or weighing more than 27 kg (60 lbs.). CauTION Avoid potential injuries or property damage! Be sure the square shoulder of the bolt [11] seats completely into the square hole before tightening the bolt.
- Page 6 [06] Loosen the eight fasteners shown. Adjust the platter so that the slots [A] are slightly wider than the width of the monitor. Retighten the fasteners. NOTE 6901-100175 <01>...
- Page 7 HEAVY! You will need assistance with this step. Have an assistant hold the monitor in place on the platter while you secure the strap [04]. CauTION Avoid potential injuries or property damage! Never leave the monitor on the wall mount unless the strap [04] is securely fastened.
- Page 8 Milestone AV Technologies, Inc. and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.