Inventory - RT Systems TM3 Installation And User Manual

inventory

Inspect the contents of the package to ensure that the parts included match those shown below. Report
missing or damaged contents to RT Systems or your TM3 reseller. However, if damage was due to shipping,
immediately report the damage to the shipping agent.
item description
The shipping and packaging materials are recyclable. Please save them for later use or dispose of them
appropriately.
TM3 monitoring unit
The main component in the shipment.
utility cd
The utility CD contains the Installation and Users Manual, Certification data, TM3 Base Station Programming Software, IP Set Software,
SNMP MIB file, OID'S, SD card default configuration files and Freeware SNMP browser link.
SD card
The SD Card is installed on the TM3 Monitoring Unit and contains default configuration data.
10 position terminal block
Included are six terminal blocks for interfacing to the terminals at the back of the TM3 Monitoring Unit.
GSM antenna
A GSM antenna is supplied. The antenna has a magnetic base for easy fitment.
power cord:
A mains lead with BS 546 plug is supplied.
cross-over ethernet cable
The supplied cross-over Ethernet cable is used for interface directly to a laptop.
installation pack
The supplied installation pack consists of 10 cable ties, 4 screws for mounting TM3 unit on 19" rack and 6 cable tie mounts.
7 7