Document Overview; Product Certification; Related Documents - RT Systems TM3 Installation And User Manual

document overview

The TM3 Unit Installation and Users Manual describes how to install a TM3 Monitoring Unit, how sensors are connected and configuration
of the sensor inputs is performed. It also describes maintenance and fault finding. After performing the installation and configuration
procedures as set out in this document, the TM3 Unit is ready for installation specific configuration and operational environmental
monitoring.

product certification

The TM3 Unit CE certification is pending. The following IEC specifications are applicable to the TM3 Monitoring Unit:
Electrical Fast Transients (EFT)
n
Electrostatic Discharge (ESD)
n
Surges
n
Radiated Susceptibility
n
Voltage Dips and Interruptions
n
Conducted Susceptibility
n
Emissions and Harmonics
n
General Products Safety Directive
n
RoHS Compliance
n

related documents

Unless otherwise noted, the following documentation and software is available on the CD provided with the device or on the applicable
product page on the RT Systems website www.rtsystems.co.za
Installation and Users Manual
n
ICASA Approval Certificate
n
GSM Module Certification Data
n
IP Set Software
n
IOD's
n
TM3 Base Station Programming Software.
n
Refer to the software help file for installation and users instructions.
SD card default configuration files
n
SNMP mib file
n
IEC 61000-4-4
IEC 61000-4-2
IEC 61000-4-5
IEC 801-3
IEC 61000-4-11
IEC 61000-4-6
IEC 61000-3-3 and IEC 61000-3-2
2001/95/EC
2002/95/EC
3