Analogue Names - RT Systems TM3 Installation And User Manual

analogue names

From the Home Page of the TM3 Monitoring Unit select Analogue Alarms Configuration Page and Analogue Names. The following page
will be displayed:
The following data can be configured:
Name Tag
n
LCD Identifier
n
Enable/Disable
n
Select Save to store data on the unit after all fields have been configured. Select Cancel and follow the prompted instructions to revert
back to the previous settings. The data will not be stored in this case.
This is the alarm name which uniquely identifies the alarm.
Enter the alarm condition description for the LCD.
Three selection options are available:
1 = Enable Notification of alarm will be made on the LCD and SMS
if selected.
0 = Disable Notification of alarm is disabled. The daily Disabled Alarms
report will include all disabled alarms.
P = Permanently Disabled
included in the Disabled Alarms report.
25 25
Notification of alarm is disabled and is not