The Control Panel; The Lcd Panel - GCC Technologies Puma III Series User Manual

Chapter 3 The Control Panel
This chapter describes the button operations with the LCM menu flowcharts of Puma III. When
the cutting plotter is ready for use as described in Chapter 1 & 2, all functions are under default
parameters.
3.1

The LCD Panel

Key
LCD Screen
Power LED
4 Arrow Keys
ENTER
PAUSE/RESUME
ON/OFF LINE
OFFSET
FORCE
SPEED
CUT TEST
DATA CLEAR
TOOL SELECT
MISC

The Control Panel

< LCD Control Panel on Puma III series >
Function
To display functions and error messages.
To indicate the power status ( light up: power on; light off: power off )
To move position, select function, or change setting.
To set item or register the immediately preceding input value.
To temporarily halt cutting process or to continue
To switch modes, stop cutting job, or abort changes of settings.
To adjust the value of blade's offset.
To adjust the value of cutting force.
To adjust the value of cutting speed and quality.
To perform cutting tests in different ways.
To clear up buffer memory.
To select tools.
To set up functions.
Please see details in
3-1
Puma III User Manual
"3.4 Menu Items"