GCC Technologies Puma III Series User Manual page 57

The Visual Basic for Applications Marcos
Select GCC_CorelDraw_AASII (GCCAASII_Draw12.gms)
and press "Run".
3. Click on "Apply".
CorelDRAW Plug-In
window will pop up.
4-Point Positioning
Length: The length of marks
Range: 10mm~50mm
Optimized Setting: 25mm
Thickness: The line thickness of marks
Range: 1mm~2mm
Optimized Setting: 1mm
Margin: The distance between marks and images
Range: 1mm~50mm
Optimized Setting: 5mm
Segmental Positioning
X Step: The distance of intermediate position on the X axis
Y Step: The distance of intermediate position on the Y axis
Range: 200mm~600mm
Optimized Setting: Less than 500mm
Multiple Copies
No. of X Copies: The numbers of copies on X axis
No. of Y Copies: The numbers of copies on Y axis
Range: 1~50. (The more copies you make, the more
time is needed for data transmission.)
Numbers of X Copies * Numbers of Y Copies = The total
amount of image copies
Copies with outline：To show outlines of image graphics
A-3
Puma III User Manual
under the "Micros in" manual,