GCC Technologies Puma III Series User Manual page 32

3. Loading the media on the platen. After loading the roll media, flatten the media on the platen
and hold the front edge of the roll media firmly.(Figure 4-8)
4. Then turn the roll downward to make an equal tension across the media. (Figure 4-9)
5. Move the pinch rollers to the precise location and be careful that the pinch rollers must be
positioned above the grid drums.
6. Push the lever downward to lower down the pinch rollers.
7. Fixes roll media guide bushes on the roll holder to secure the roll media.
8. Turn on the power switch, and the tool carriage will size the media automatically. Then the
cutting plotter is ready to work.
Operation
Figure 4-8
Figure 4-9
4-5
Puma III User Manual