GCC Technologies Puma III Series User Manual page 14

Step 2
Puma III-132 Stand: There are four components to assemble it. Please refer to
Figure 2-3, 2-4 and 2-5.
3
2
H-stand
Figure 2-3
(Puma III-132)
Step 3
Then connect part 3 and H-shape stand. Firstly, position the extension of part 3
into the squares holes on H-stand. Secondly, insert the screws into the holes
besides the squares then tighten them, see Figure 2-6.
*Only Puma III-60 has two
side screws.
*Puma III-132 doesn't
have side screws.
* Stand for Puma III-60 is
an optional item.
Figure 2-6
Lastly, (For Puma III-132 only) place the stand beam perpendicularly to part 3
and put the screws into the holes and tighten them as Figure 2-7.
Figure 2-7
(Only for Puma III-132)
Installation
Stand
1
H-stand
Figure 2-4
(Puma III-132)
4
Stand Beam
2-4
Puma III User Manual
Figure 2-5
(Puma III-132)
3
Stand
H-stand