Stand & Flexible Media Support System (For P3-132S) - GCC Technologies Puma III Series User Manual

Step 3
Place the cutter firmly onto the stand assembling by screws.
2.2.2 Stand & Flexible Media Support System (for P3-132S)
Please follow procedure below to assemble stand and media support system.
Step 1 Check screws and wrench in the accessory box:
Stand is a standard item for Puma III-132. Item List：
1 piece of H-shape stand
2 pieces of stands
1 piece of stand beam
1 piece of M5 L-shape hexagon screw driver
4 piece of Stand Wheel
1 piece of Wrench 14mm
1 piece of Installation Guide for Stand Set
1 set of Roll Holder (2 pieces)
1 set of Roll Holder Support (2 pieces)
1 set of Roll Media Flange (2 pieces)
1 set of Roll Holder Guide Bushes (4 pieces)
1 piece of M6 L-shape hexagon screw drive
32 pieces of M6 screws
Installation
Figure 2-2
2-3
Puma III User Manual