Stand & Flexible Media Support System; Stand Installation(For P3-60) - GCC Technologies Puma III Series User Manual

2.2 Stand & Flexible Media Support System

2.2.1 Stand Installation(for P3-60)

Please follow procedure below to assemble stand and media support system.
Step 1 Please examine supplied items in the accessory box of stand carton
before you install:
Stand is a optional item for Puma III-60,Item List：
2 pieces of T-shape stand
1 piece of Stand Beam
18 pieces of M6 screws
1 piece of M6 L-shape hexagon screw drive
1 piece of Wrench 14mm
1 piece of Installation Guide for Stand Set
1 piece of M5 L-shape hexagon screw drive
4 piece of Stand Wheel
1 piece of Roll Base.
Step 2
There are three components to assemble it. Please refer to Figure 2-1. Assemble
the T-shape stand and stand beam by screws
Installation
Figure 2-1
2-2
Puma III User Manual