Operation; The Control Panel; Operation 3.1 The Control Panel - GCC Technologies EXPERT 24 User Manual

3. Operation

3.1 The Control Panel

3.1.1 The Outline of control panel
Key
POWER LED
ERROR LED
ON/OFF LINE
PAUSE
REPEAT
DATA CLEAR
CUT TEST
ORIGIN SET
4 Arrow Keys
3.1.2 Reset Origin
Note:
Make sure the machine is in off-line mode to enable this function.
Step 1 Move the carriage to a new position.
Operation
Function
Indicates the power status ( LED ON: power on; LED OFF: power off )
Indicates the error status ( LED ON: error; LED OFF: normal )
Switches modes or stops cutting job (LED ON: on-line; LED OFF:
off-line)
While in on-line mode: only ON/OFF LINE and PAUSE keys activated
While in off-line mode: the settings in VLCD can be adjusted.
Temporarily halts the cutting process or resumes a paused job
Repeats last job.
Clears up buffer memory.
Perform cutting tests on different media.
Resets origin at a new position.
Moves carriage position, selects function, or changes setting.
Figure 3-1
3-1
Expert 24 user manual