Diagnostic Test For Media Sensors - GCC Technologies J5 Series Maintenance Manual

5.1.4 Diagnostic Test for Media Sensors

This test is to diagnose the media sensors. If they are faulty, the cutting plotter cannot detect the media
length correctly. You can see the current front and rear sensor condition, you can turn it on or off to see
if sensors are out of order or not.
Up/Down Key
Previous/Next Test item
Note that: the LCM displays one of following messages
1.Now Open Front Eye Cover Rear Eye CANCEL
2.Now Cover Front Eye Open Rear Eye CANCEL
3.Now Open Front Eye Cover Rear Eye CANCEL
4.Now Cover Front Eye Cover Rear Eye CANCEL
Check Media Sensors?
Enter Key Pressed
Display Current
Sensor Condition Messages
Change Sensor Condition
47
Version : 9.0
Cancel Key