Material Selection; Standard Pipe Sizes And Schedules Table - Baileigh Industrial TN-600 Operator's Manual

MATERIAL SELECTION

CAUTION:
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.
When selecting materials keep these instructions in mind:
 Material must be clean and dry. (without oil)
 Material should have a smooth surface so it processes easily.
 Dimensional properties of material must be consistent and not exceed the machine capacity
values.
 Chemical structure of material must be consistent.
 Buy certificated steel from the same vendor when possible.

STANDARD PIPE SIZES AND SCHEDULES TABLE

PIPE
O.D.
SIZES
1/8 0.405
1/4 0.540
3/8 0.675
1/2 0.840
3/4 1.050
1 1.315
1-1/4 1.660
1-1/2 1.900
2 2.375
2-1/2 2.875
All sizes are in inches
It must be determined by the customer that materials being
Pipe Schedules and Wall Thickness
5 10
0.400 0.050
0.500 0.070
0.500 0.070
0.700 0.080
0.700 0.080
0.700 0.110
0.700 0.110
0.700 0.110
0.700 0.110
0.800 0.120
40 80
0.068 0.095
0.088 0.119
0.091 0.126
0.109 0.147
0.113 0.154
0.133 0.179
0.140 0.191
0.145 0.200
0.154 0.218
0.203 0.276
19
19
160 XX STRONG
0.188 0.294
0.219 0.308
0.250 0.358
0.250 0.382
0.281 0.400
0.344 0.436
0.375 0.552