System Status Codes - MAGSTIM RAPID2 Operating Manual

2
Magstim Rapid
SECTION: 7. SYSTEM STATUS CODES
BASE Controller Error Codes produced by the User Interface.
Error Codes
U24
U25
U26
U27
U28
U29
U34
U35
U36
U37
U38
Error codes produced by Coil.
Error Codes
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
The MAGSTIM Company LTD
Description
UI Power Supply Failure
Stack underflow
Stack overflow
RTS overrun
Watchdog Timeout
ROM Checksum Incorrect
No serial communications
Loss of communication
Bad NVRAM Checksum
Battery Voltage Low
Bad External Flash Checksum Detected.
Description
ROM Checksum Incorrect.
EEPROM Checksum Incorrect.
Invalid coil Category.
Invalid Power Identification .
Temperature sensor circuit failure.
Bad Serial command or received data checksum.
Internal Software Error.
Invalid Coil Temperature ID.
Invalid temperature algorithm coefficient.
Coil controller malfunction.
40
MOP03-EN-01
June 2011