Main Options Menu - MAGSTIM RAPID2 Operating Manual

2
Magstim Rapid

4.2 MAIN OPTIONS MENU

All selections are made via the touch-screen. To select, touch the centre of the button symbols.
Single Pulse
Repetitive Mode
Session Mode
System
File Maintenance
The MAGSTIM Company LTD
Selecting this option will call up the Single Pulse Mode Screen.
This allows the system to be fired at a maximum rate of 1Hz, up to 100%
power and 0.5 Hz from 101-110%. It also allows an MEP module to be
configured.
Selecting this option will call up the Repetitive Mode Set-up Screen. (See
section 4.5) This allows the system to run a user defined train of pulses from
a single trigger.
Selecting this option will call up the Session Mode Setup Screen. (See
section 4.9) This allows the system to run a series of separately defined
trains of pulses from a single trigger.
Selecting this option will call up the Systems Options Menu Screen. (See
Section 5)
Selecting this option will call up the File Maintenance Screen. (See section
6.1)
18
MOP03-EN-01
June 2011