Additional Connections - MAGSTIM RAPID2 Operating Manual

2
Magstim Rapid
3.2 Power Supply Module (PSU – 3014-00)
Power Supply Module (PSU – 3013-00)

3.3 ADDITIONAL CONNECTIONS

Printer
Connection
25 Way D
Type
Connector
.
25 Way D Type Connector (situated on rear of the UI, 2 rows of pins)
This connector is situated on the rear of the UI, and has 2 rows of pins. The
connector links the UI to the Magstim Rapid
previous page.
26 Way D Type Connector (situated on rear of UI, 3 rows of pins)
This connector is situated on the rear of the UI, and has 3 rows of pins. It provides
trigger input and output signals (see page 43).
DC Power Jack (situated on rear of UI)
The DC Power Jack is situated on the rear of the UI. This connector allows an
external 24V, 750mA DC power supply to be attached. A suitable medical grade
supply must be used, conforming to IEC 60601-1. This is NOT required when the UI
is connected to the Magstim Rapid
The MAGSTIM Company LTD
230VPSU units shown.
115V units are identical in
appearance to the 230V
units, with the exception of
the voltage/power rating
labels sited on the rear of
the units.
2
as shown on the diagram on the
2
.
10
MOP03-EN-01
SD Card
Insertion Point.
15 Way D
Type
Connector
Batteries.
26 Way D
Type
Connector
June 2011