X-Fan Setting - Gree XE73-44/E Owner's Manual

Wired Controller XE73-44/E

3.13 X-fan Setting

X-fan function: After the unit is turned off, the water in evaporator of indoor unit will be
automatically evaporated to avoid mildew.
In the Cooling or Dry mode, press FUNCTION till the unit enters the X-fan setting interface and
then press SWING/ENTER to active this function.
When the X-fan function is activated, press FUNCTION to the X-fan setting interface and then
press SWING/ENTER to cancel this function.
X-fan function setting is as shown in Fig.15
Wi Fi
on X-fan function
Notes:
When the X-fan function is activated, if turning off the unit by pressing ON/OFF or by the
.
①
remote controller, the indoor fan will run at the low fan speed for 2 min, with "X-FAN" displayed on
the LCD. While, if the X-fan function is deactivated, the indoor fan will be turned off directly.
X-fan function is unavailable in the Fan or Heating mode.
② .
Wi Fi
Press "FUNCTION" button into X-fan state
Wi Fi
Press "SWING/ENTER" button to turn
off X-fan function
Fig.15 X-fan Setting
13
Wi Fi
Press "SWING/ENTER" button to turn
on X-fan function
Wi Fi
Press "FUNCTION" button into X-fan state