Buttons; Buttons On The Wired Controller - Gree XE73-44/E Owner's Manual

No. Display
1
2
3
4
5
6 Sleep
7 Fresh air
8 Quiet
9 Health
10 Absent
11 I-DEMAND
12
13 Child-lock
14 Up & down swing
Slave wired
15
controller
16 Fan speed
17 No card
18 Left & right swing
19 X-fan
20 Temperature
21 E-heater
22 Memory
23 Clean
24
25 Defrost
26 Timer
27 Shield

2 Buttons

2.1 Buttons on the Wired Controller

Automatic mode (under auto mode, the indoor unit will select its
Auto
operating mode according to the variation of room temperature)
Cool Cooling mode
Dry Dry mode
Fan Fan mode
Heat Heating mode
Display when sleep function is set
Display when fresh air function is set
Display when quiet function is set
Display when health function is set
Display when absent function is set
Display when I-DEMAND function is set
WiFi Display when WiFi function is set
Child-lock status, display when child-lock function is set
Display when up and down swing function is set
Icon of slave wired controller, it will display when slave wired
controller is set (this function is unavailable for this unit)
The fan speed set currently (including auto, low, medium low,
medium, medium high, high, and turbo)
No card in gate control system
Display when left and right swing function is set
Display when X-fan function is set
It will display the setting temperature
On/off switch of auxiliary heating
Memory status (After power failure and re-energizing the unit, it will
resume to ON/OFF status of unit before the power failure)
Filter washing reminder (this function is unavailable for this unit)
Save Display when energy-saving function is set
Defrosting status
Display when timer status is set
Shielding status
1
5
Fig. 3 Buttons on the Wired Controller
Wired Controller XE73-44/E
Table 1
Instruction of Display
2 3
6
7
2
4
8