Energy Saving Function Setting - Gree XE73-44/E Owner's Manual

Wired Controller XE73-44/E

3.11 Energy Saving Function Setting

Turn on energy saving function:
1）Energy Saving Setting for Cooling
When the unit runs under the COOL or DRY mode, press FUNCTION button to select "SAVE"
function option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the lower limit, after that,
press the SWING/ENTER button to activate this function.
2）Energy Saving Setting for Heating
When the unit runs under the HEAT mode, press FUNCTION button to select "SAVE" function
option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the upper limit, after that, press
SWING/ENTER button to activate this function.
Note:
under energy saving setting mode, press "MODE" button to switch the energy saving setting for
COOL or HEAT mode.
Cancel energy saving function:
If energy saving function has been set, press FUNCTION button on the panel to select "SAVE"
function option. When
▼ button, energy saving function will be canceled; if you press SWING/ENTER button after pressing
▲ or ▼ button, energy saving function will be activated.
Wi Fi
Turn on the unit with the "SAVE"
function deactivated
Wi Fi
Press "SWING/ENTER" button to
activate the "SAVE" function
icon flashes, if you press SWING/ENTER button without pressing ▲ or
Wi Fi
Press "FUNCTION" button to select the
"SAVE" function option
Wi Fi
Press ▲ or ▼ to adjust the upper limit
Fig. 13 Energy Saving Function Setting
11
Wi Fi
Press ▲ or ▼ to adjust the lower limit
Wi Fi
Press "MODE" button to switch to the
"SAVE" setting for heating