Absent Setting - Gree XE73-44/E Owner's Manual

3.16 Absent Setting

Absent on: Press FUNCTION under on state of the unit till the unit enters the Absent setting
interface. Press SWING/ENTER to confirm the setting.
Absent off: When the Absent function is activated, press FUNCTION to enter the Absent setting
interface. After that, press SWING/ENTER to cancel this function.
Note:
1. This function is only available in heating mode.
2. When this function has been set, set temperature is displayed in 8°C(46°F). In this case, temperature
setting and fan speed setting are shielded.
3. This function will be cancelled when switching modes.
4. This function and sleep function cannot be on simultaneously. If Absent function is set firstly and
then sleep/quiet function is set, Absent function will be cancelled while sleep function will be valid,
and vice versa.
Wi Fi
Turn on the unit,without turning on
absent function
Wi Fi
Press "FUNCTION" button into absent state
Wi Fi
Press "SWING/ENTER" button to turn
off absent function
Fig. 18 Absent Setting
16
Wired Controller XE73-44/E
Wi Fi
Press "SWING/ENTER" button to turn
on absent function
Wi Fi
Press "FUNCTION" button into absent state