Conair GB/ WSB User Manual page 41

know the number.
your own selected regular password will work and as long as
you don't forget it, your ok.
Blenders are pre-programed with two normal passwords;
(22222) is the default password for the PROGRAM mode,
(11111) is the default password for the MANUAL mode.
can alter these passwords to any 5 digit number, but you
must know the current PROGRAM password to change it.
some reason the password has been altered and you can not
remember it, we have a special "backdoor" password that will
let you in no matter what.
provide that password in this manual.
However, there is a problem.
factory obtains this password, then he will always have
access to the Program mode of the blender no matter what.
Now, with this star function, you have the option to select
from 10 different "backdoor" passwords.
"backdoor" password is known to the wrong person, you can
call us for a new one.
passwords to just anyone.
it is not that easy to obtain these numbers.
To activate a new "backdoor" password, you will enter a
number from 00000 to 00009 using this star function.
number activates a different password.
the current backdoor password, the one we have used for over
10 years.
know here in the office and they will supply a number from 1
to 9, and the associated new "backdoor" password.
After this new "backdoor" password is selected, you can
safely change the regular password to one only you know, and
use that in normal production.
the backdoor to get in.
password, and you also forget which backdoor password you
selected, then we will work with you and go through the
entire list to find the one that works.
*87 Press (*,8,7) to set flag for operation in a VOLUMETRIC
mode.
are completely ignored.
recalibration does not take place.
a volumetric feeder without checking or correcting for
errors.
allows operation even if the load cells become damaged.
Dispense times will be based entirely on the WT and TI
parameters.
Use the * key to toggle flag ON or OFF.
Power On will always set this flag to OFF.
Press EXIT when desired flag status is displayed.
*88 Press (*,8,8) to force a documented printout of the display
on the controller front.
display will print:
But we still will, just in case.
For a new one, call us and talk with someone you
With this flag ON (VOLUMETRIC mode), the load cells
Since load cell readings are ignored, this flag
Page 42
For obvious reasons, we do not
You must call us.
If the wrong person in your
We will not give these backup
In fact, since only I know them,
entering 0 activates
No one will be able to use
If you forget your regular
Error correction and rate
The unit functions like
DATE, TIME, Machine number, and
Then
You
If for
If your current
each