Conair GB/ WSB User Manual page 26

Three (3) operation Modes are available; AUTOMATIC, MANUAL, PROGRAM.
This is the NORMAL operating mode.
is in this mode.
AUTOMATIC mode is indicated by the ABSENCE of the letter "P" or "M" at
the left end of the display.
Only the VIEW, RECIPE, BATCH, FAST, TAG, *, CE, and EXIT keys are
available in this mode.
These keys operate BETWEEN cycles only or when the PAUSE switch is on.
To stop between cycles, use the "OFF AT END OF CYCLE" switch.
VIEW DATA: Press to display the CURRENT Date and Time, LAST CLEARED
(VIEW) date and time, and stored material usage data.
are available: (in Pounds, Kilos, Grams, or Ounces)
Number of CYCLES that have occurred:
Weight of REGRIND that has been dispensed:
Weight of NATURAL:
Weight of COLOR:
Weight of ADDITIVE:
Total weight of ALL materials:
Each successive press of the VIEW key displays the next
total.
seconds.
data.
the sequence.
operation resumes.
grams, kilograms, or ounces by a selection procedure
explained later (*89).
Press the VIEW key once followed by the "*" key to cause all
information to be sent to the printer (if available).
then clear the data, press 00 within 5 seconds.
other key or, wait 5 seconds, to continue the process
without clearing the totals.
RECIPE: This key allows you to LOOK at, RUN, and SAVE RECIPES.
(RCP) To SAVE a recipe you must be in the PROGRAM mode.
are thumbwheel switch settings.
numbered 00 to 99.
This key is NOT FUNCTIONAL unless the 3rd digit of the "FLG"
parameter is set to 1 (xx1xx).
MAINTENANCE section, PARAMETER TABLE, "FLG".
In normal Automatic mode:
currently in use, display says (GET
currently in use then display will flash through the current
stored data:
(RCP
Press CE to CLEAR CURRENT RECIPE and return to thumbwheels.
KEYPAD - AUTOMATIC OPERATION MODE
Automatic dispensing occurs ONLY in this mode.
The last displayed line will say (00=CLEAR) for 5
During this time, you may press 0,0 to clear the
Waiting 5 seconds or pressing any other key will exit
When the sequence is exited, normal automatic
These totals may be displayed as pounds,
__), (R = xx
Page 27
When power is turned on, the unit
100 recipes may be stored,
To do this, see the SOFTWARE
Press RCP key.
__).
), (C = xx.x), (A = xx.x)
The
Six totals
(CY= #####)
(R = #####)
(N = #####)
(C = #####)
(A = #####)
(T = #####)
To
Press any
Recipes
If no RECIPE is
If a RECIPE is