Checking The Compatibility Of Vehicle And Accessories; Boxes And Connectors; Video-Interface - NavLinkz RL2-MZD Manual

1.2.

Checking the compatibility of vehicle and accessories

Requirements
Brand Compatible vehicles
2,3,5,6,8
Biante
CX-5
Mazda
CX-9
MX-5
Limitations:
Video only
Factory rear-view camera
Video input signal
1.3.

Boxes and connectors

1.3.1. Video Interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle's digital signals out of the vehicle's CAN-bus and
converts them for the video interface.
Version 09.02.2023
The interface inserts ONLY video signals into the infotainment. For inserting
Audio signals either the possibly existing factory audio-AUX-input or a FM-
modulator can be used. If 2 audio sources shall be connected to the infotainment,
an additional electronic is necessary to switch them.
Automatically switching-back from inserted video to factory rear-view camera is
only possible while the reverse gear is engaged. To delay the switch-back an
additional electronic part is required.
NTSC video sources compatible only.
HW: CAM(V31)/(V22)
Compatible systems
MZD Connect infotainment
with 7inch monitor
RL2-MZD