Checking The Compatibility Of Vehicle And Accessories - NavLinkz RL4-MGU Manual

1.2.

Checking the compatibility of vehicle and accessories

Requirements
Brand Compatible vehicles for
F-series vehicles and G-series vehicles with
MGU (new main menu + new iDrive + LCI or
BMW new F/G seri from 2019)
Send VIN and picture of main-menu for
identification
Limitations
Video only
Factory rear-view camera
After market front camera
Dynamic guidelines
PDC display
Version 08.07.2022
The interface inserts ONLY video signals into the infotainment. For inserting Audio
signals either the possibly existing factory audio-AUX-input or a FM-modulator can
be used. If 2 audio sources shall be connected to the infotainment, an additional
electronic is necessary to switch them.
Automatically switching-back from inserted video to factory rear-view camera is only
possible while the reverse gear is engaged. To delay the switch-back an additional
electronic part is required.
The front camera will automatically be switched for 10 seconds after disengaging
the reverse gear. A manually front camera switching is also possible for 7 seconds.
Displayed dynamic guidelines are not available in all vehicles.
The PDC display does not work in all vehicles.
HW:CAM(V100)/(V30.3)
Compatible systems
S609A Professional Navigation, S6UPA Navigation
Plus, Live Cockpit Professional S6U3A - Only MGU
head-unit by Harman with 10.25 or 12.3inch
monitor.
Not compatible with F40 S6U2A MGU 8.8inch and
F44 S6U3A MGU by Alpine.
RL4-MGU