Front Panel Features
Data Storage
© National Instruments Corporation
Table 3-8. TRIG Connector Signals
Pin
1
TRIG
2 (Shield)
GND
The NI PXI-8101/8102 controller has the following front-panel features:
•
A controller reset pushbutton (press the button to generate a reset to the
controller)
•
Two front panel LEDs that show PC status
–
The POWER OK LED indicates the power status of the
controller. The LED will indicate one of the following states:
•
ON steady—PXI and onboard power is on and within
regulation limits.
•
Blinking—One of the PXI or onboard supplies is operating
outside of the normal limits, or is not functioning.
•
OFF—The power to the controller is off.
–
The DRIVE LED indicates when an access to the internal hard
disk is occurring.
The NI PXI-8101/8102 has the following data storage features:
•
2.5 in. SATA notebook internal hard drive
•
USB storage support—USB CD-ROM, mass storage device, or
floppy drive
Signal Name
3-11
Chapter 3
I/O Information
Signal Description
Trigger
Ground
NI PXI-8101/8102 User Manual